What To Do When Weewx Stops Updating and Sending Data to Meteotemplate – Part 10

From the Beginning: An Introduction – Part 1

Previous: Publishing Weather Station Data to Third Party Websites – Part 9

After using Weewx and Meteotemplate the past couple of years, I noticed that sometimes Weewx randomly stops updating and/or sending data to my Meteotemplate website, Twitter, and other services.

Sometimes, the fix is simply to run a software update on the Raspberry Pi and restarting the Raspberry Pi. Other times, directly restarting Weewx itself is the solution.

As per this page of this guide, run the software update in Terminal using these commands:

  1. sudo apt-get update (and press enter and wait until it’s done)
  2. sudo apt-get upgrade (and press enter and wait until it’s done)
  3. Then restart your Raspberry Pi. Type “sudo reboot” (w/o quotes) Or Start Menu > Shutdown > Reboot

To restart Weewx itself, open Terminal, and copy/paste this:

sudo /etc/init.d/weewx restart (and press enter)

From the Beginning: An Introduction – Part 1

Previous: Publishing Weather Station Data to Third Party Websites – Part 9

How to Create Your Own Weather Station Website

IMPORTANT NOTE: This post series is currently a work in progress.

An Introduction

I have been fascinated with weather for many years. A few years ago, I was gifted an Acurite 3-in-1 weather station by a Secret Santa months before I was laid off. A couple of years later, after a particularly harsh winter, I noticed it was showing signs of wear, and decided to replace it. I noticed a good deal on the 5-in-1 unit, and had saw that some others were publishing their weather station data online, and decided I wanted to do that as well. For a while, I was happy with Weather Underground, but realized I wanted my own dedicated site I have control over as well, in addition to publishing current conditions to a Twitter account and Facebook page, and this project was fully realized.

Given the amount of time and effort that went into research and completing this project, I discovered a lot of information that really helped me, so I feel I have an obligation to share the experience with others, in hopes it will help them.

What’s Involved

This project involves several steps, but in a nutshell, it includes:

  • Setting up the Raspberry Pi
  • Web space to host the website
  • Setting Up Meteotemplate (which grabs data and current conditions from the Weewx software on the Raspberry Pi,
  • Setting up Weewx on your Raspberry Pi
  • and Setting up an IFTTT or dlvr.it account to automatically publish updates to Twitter.

For the sake of convenience and easier navigation, here are the 10 parts of this blog post series:

You can find my weather stations websites, Facebook pages, and Twitter accounts here.

Side note: please do NOT reach out to me for any kind of technical support or help regarding this guide. Any such messages will be ignored, as I simply don’t have the time. Though you’re welcome to connect with me in general via email or on Twitter via my Contact page. I will not be held responsible for any actions you take during your own weather station website project setup. My only advice is to backup any files before you make changes, and be very careful and deliberate when making those changes. Best of luck to you!